Integrated steel processing and manufacturing services.
Dream Metplast offers six integrated processing and supporting capabilities, from precision slitting to surface-protection lamination and controlled material handling, all within a single 45,000 m² facility.
- 0 m/min
- Line Speed
- 0.2–3.0 mm
- Thickness
- 0 mm
- Maximum Width
- ±0.05 mm
- Slit Accuracy
Capabilities
Eight services. One integrated workflow.
From precision coil slitting, Cut-to-Length and shearing to press operations, welding and in-house tooling — every service at our Dadri processing centre follows the same documented specification, in one facility.
Processing flow
From master coil to component dispatch.
One integrated path links controlled coil handling with precision conversion into slit coil or flat-sheet output.
- 01
Coil Slitting
Master coils are slit into narrower widths for the next processing stage.
- 02
Cut-to-Length
Coil-fed steel is converted into sheets for downstream operations.
- 03
Press Shop
Press machines support sheet metal component manufacturing.
- 04
Welding / Fabrication
Formed parts move through welding, fabrication and assembly as required.
- 05
Final Dispatch
Completed output reaches the final dispatch stage.
Processing lines listed in the presentation
Counts as listed in the supplied presentation
- 01CTL for CR2
- 02CTL for HR2
- 03Coil slitting2
- 01Coil slitting1
- 02CTL — material not specified3
- 03Shearing1
Press shop development plan
An operating base of 50 machines at Dadri Unit-4, with two planned phases taking capacity to 70 in total. Planned machines are shown separately so they are never presented as installed capability.
Reported running in supplied presentation
Planned commencement
Planned commencement
Includes future phases